The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.
Cold mounting material
| Product Description |
The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.
Advantage
1. Fast, smooth and highly transparent curing
2. Low viscosity and excellent flow properties
3. Excellent penetration into small holes and depressions
4. The slices have a good supporting effect on the slices after curing.
5. The slices have sufficient hardness and toughness after curing
6. The slices have sufficient brightness after polishing
7. The shrinkage rate of slices before and after curing is extremely low
Instructions
Mix acrylic powder and curing agent at a ratio of 1.4:1 (volume ratio), stir slowly (to avoid the generation of artificial bubbles) and inject it into the mold until it is completely solidified. The curing time is about 10-15 minutes. This product contains a defoaming agent. If used properly, there will generally be no bubbles.
Product packaging
1kg acrylic powder + 800ml curing agent
Tags :
Metallographic hot mosaics are suitable for different types of mosaics to do sample mosaics, in order to test the hardness of small workpieces and observe the metallographic structure. The Mosaic powder can be prepared by the Mosaic machine sample preparation for 8-15 minutes, the heat preservation is 140-180℃, the Mosaic pressure is 30±3MPa, and the sample preparation can be completed.
The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.
Like various cold embedding resins, crystal glue can be easily peeled off after curing. The experimental operation is simple. You only need to pour the sample and cured resin or crystal glue into the model. It is economical and applicable, and the mold body is moderate, saving the cost of cold mounting materials. Reuse saves the cost of slicing molds.
Sign Up To Our Newsletters
Tel / Whatsapp : +86-18352836802
Email : info@johoyd.com
© 2024 Johoyd Instrument Co.,LTD. All Rights Reserved.
