HMP-1AB automatic metallographic sample grinding and polishing machine

In the process of metallographic sample preparation, the polishing of the sample is a major process. The purpose of polishing is to remove the fine abrasion marks on the grinding surface of the sample and obtain a bright mirror surface for observation and measurement of the metallographic structure under a microscope. The P-1 metallographic sample polishing machine can be used to polish the finely ground metallographic sample. The shell adopts integral plastic absorbing technology, with novel appearance, stable rotation, low noise, convenient operation, and high work efficiency. It can adapt to the polishing requirements of a variety of materials. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for polishing metallographic samples.

In the process of metallographic sample preparation, the grinding of the sample is an indispensable process. The grinding of the sample is generally divided into two processes: coarse grinding and fine grinding. The purpose of rough grinding is to obtain a flat surface, which is generally done on a grinder, and there are still deep marks on the surface of the sample. The purpose of fine grinding is to eliminate these wear marks, so as to obtain a flat and smooth grinding surface, and prepare for the next polishing. The M-2 metallographic sample pre-grinding machine can be used for the fine grinding of metallographic samples. It has a double-disc design and can be operated by two people at the same time. It has the characteristics of convenient operation and high working efficiency, and has its own cooling device, which can cool the sample during grinding and polishing to prevent damage to the metallographic structure due to overheating of the sample. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for pre-grinding metallographic samples.

In the metallographic sample preparation process, the grinding and polishing of the sample are indispensable procedures. After the sample is polished, a mirror-like surface can be obtained. The MP-2DT metallographic sample grinding and polishing machine adopts a high-end touch screen, which can make the speed of the grinding and polishing disk infinitely adjustable between 50-1000r/min. The grinding and polishing process of the sample can be completed by replacing the metallographic sandpaper and polishing fabric. , Showing a wider range of applicability. The shell adopts integral blister, novel appearance, stable rotation, low noise, convenient operation, high working efficiency, etc., and comes with a cooling device, which can cool the sample during grinding and polishing to prevent damage due to overheating of the sample Microstructure. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for grinding and polishing metallographic samples.

HMP-1AB is a single-disc automatic grinding and polishing machine integrating pre-grinding, grinding and polishing. It adopts single chip microcomputer technology to control through touch screen, the grinding and polishing disc is driven by DC brushless motor, V-belt is used for transmission, the grinding head is driven by stepping motor, and the synchronous belt is used for transmission. It has the characteristics of stable rotation, low noise, long life, safety and reliability; You can adjust the rotation speed of the grinding head and the grinding and polishing plate according to the user's needs, set the pressure, set the sample preparation time, and adapt to different needs; comes with a lighting system, which is convenient to take and place samples; comes with a cooling device, which can be used during grinding Cooling the sample to prevent damage to the metallographic structure due to overheating of the sample. It is an ideal choice for metallographic sample preparation equipment in factories, scientific research units and laboratories of universities and colleges.

HMP-2AB is a single-disc automatic grinding and polishing machine integrating pre-grinding, grinding and polishing. It adopts single chip microcomputer technology to control through touch screen, the grinding and polishing disc is driven by DC brushless motor, V-belt is used for transmission, the grinding head is driven by stepping motor, and the synchronous belt is used for transmission. It has the characteristics of stable rotation, low noise, long life, safety and reliability; You can adjust the rotation speed of the grinding head and the grinding and polishing plate according to the user's needs, set the pressure, set the sample preparation time, and adapt to different needs; comes with a lighting system, which is convenient to take and place samples; comes with a cooling device, which can be used during grinding Cooling the sample to prevent damage to the metallographic structure due to overheating of the sample. It is an ideal choice for metallographic sample preparation equipment in factories, scientific research units and laboratories of universities and colleges.