Metallographic specimen mount is a very important step in the process of metallographic specimen preparation. It is especially suitable for some tiny samples which are difficult to handle or have irregular shape, easy to hand or follow-up automatic grinding and polishing (can be used with the company's automatic grinding and polishing machine, the effect is better.). It is especially suitable for specimens with edge protection or with automatic grinding and polishing. The mounting of specimens is an essential working procedure. It is especially suitable for metallographic laboratories in factories, colleges and universities and scientific research institutions, it is the best choice for metallographic sample mount.
Metallographic specimen mount is a very important step in the process of metallographic specimen preparation. It is especially suitable for some tiny samples which are difficult to handle or have irregular shape, easy to hand or follow-up automatic grinding and polishing (can be used with the company's automatic grinding and polishing machine, the effect is better.). It is especially suitable for specimens with edge protection or with automatic grinding and polishing. The mounting of specimens is an essential working procedure. It is especially suitable for metallographic laboratories in factories, colleges and universities and scientific research institutions, it is the best choice for metallographic sample mount.
XQ-2BM Type metallographic sample mount machine is used to mount micro or irregular specimen which is not easy to handle. It is a necessary process before grinding and polishing with thermosetting polymer. The mechanical mount machine, heating temperature controlled by digital thermometer, various stable and reliable performance, for more safe operation, this machine is equipped with security protection cover, is the best sample mount equipment.
HMP-2AB is a single-disc automatic grinding and polishing machine integrating pre-grinding, grinding and polishing. It adopts single chip microcomputer technology to control through touch screen, the grinding and polishing disc is driven by DC brushless motor, V-belt is used for transmission, the grinding head is driven by stepping motor, and the synchronous belt is used for transmission. It has the characteristics of stable rotation, low noise, long life, safety and reliability; You can adjust the rotation speed of the grinding head and the grinding and polishing plate according to the user's needs, set the pressure, set the sample preparation time, and adapt to different needs; comes with a lighting system, which is convenient to take and place samples; comes with a cooling device, which can be used during grinding Cooling the sample to prevent damage to the metallographic structure due to overheating of the sample. It is an ideal choice for metallographic sample preparation equipment in factories, scientific research units and laboratories of universities and colleges.
HMP-1AB is a single-disc automatic grinding and polishing machine integrating pre-grinding, grinding and polishing. It adopts single chip microcomputer technology to control through touch screen, the grinding and polishing disc is driven by DC brushless motor, V-belt is used for transmission, the grinding head is driven by stepping motor, and the synchronous belt is used for transmission. It has the characteristics of stable rotation, low noise, long life, safety and reliability; You can adjust the rotation speed of the grinding head and the grinding and polishing plate according to the user's needs, set the pressure, set the sample preparation time, and adapt to different needs; comes with a lighting system, which is convenient to take and place samples; comes with a cooling device, which can be used during grinding Cooling the sample to prevent damage to the metallographic structure due to overheating of the sample. It is an ideal choice for metallographic sample preparation equipment in factories, scientific research units and laboratories of universities and colleges.
In the metallographic sample preparation process, the grinding and polishing of the sample are indispensable procedures. After the sample is polished, a mirror-like surface can be obtained. The MP-2DT metallographic sample grinding and polishing machine adopts a high-end touch screen, which can make the speed of the grinding and polishing disk infinitely adjustable between 50-1000r/min. The grinding and polishing process of the sample can be completed by replacing the metallographic sandpaper and polishing fabric. , Showing a wider range of applicability. The shell adopts integral blister, novel appearance, stable rotation, low noise, convenient operation, high working efficiency, etc., and comes with a cooling device, which can cool the sample during grinding and polishing to prevent damage due to overheating of the sample Microstructure. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for grinding and polishing metallographic samples.
In the process of metallographic sample preparation, the grinding of the sample is an indispensable process. The grinding of the sample is generally divided into two processes: coarse grinding and fine grinding. The purpose of rough grinding is to obtain a flat surface, which is generally done on a grinder, and there are still deep marks on the surface of the sample. The purpose of fine grinding is to eliminate these wear marks, so as to obtain a flat and smooth grinding surface, and prepare for the next polishing. The M-2 metallographic sample pre-grinding machine can be used for the fine grinding of metallographic samples. It has a double-disc design and can be operated by two people at the same time. It has the characteristics of convenient operation and high working efficiency, and has its own cooling device, which can cool the sample during grinding and polishing to prevent damage to the metallographic structure due to overheating of the sample. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for pre-grinding metallographic samples.
In the process of metallographic sample preparation, the polishing of the sample is a major process. The purpose of polishing is to remove the fine abrasion marks on the grinding surface of the sample and obtain a bright mirror surface for observation and measurement of the metallographic structure under a microscope. The P-1 metallographic sample polishing machine can be used to polish the finely ground metallographic sample. The shell adopts integral plastic absorbing technology, with novel appearance, stable rotation, low noise, convenient operation, and high work efficiency. It can adapt to the polishing requirements of a variety of materials. It is suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for polishing metallographic samples.
HQG-200D high-speed precision cutting machine adopts touch screen and PLC control, with stable performance and real-time display of cutting parameters; Y-axis automatic feed cutting, high positioning accuracy, wide speed range, strong cutting ability; The cutting chamber adopts a fully enclosed structure and a transparent protective cover for observation during cutting; Equipped with a circulating cooling system, the surface of the cut sample is bright, flat, and free of burns; Especially suitable for precise deformation free cutting of metals, electronic components, ceramic materials, crystals, hard alloys, rocks, minerals, concrete, organic materials, biological materials (teeth, bones), and other materials. It is an ideal choice for desktop automatic precision cutting.
In the metallographic sample preparation process, the cutting of sample materials is the first important process of sample preparation. The HQG-80 cutting machine can be used to cut general metallographic and petrographic materials to ensure absolute safety. To cut samples, the machine adopts a fully enclosed double casing structure and is equipped with a cooling water tank, which can make the configured cooling liquid be recycled. In order to prolong the service life of the equipment and the convenience of operation and maintenance, the inner casing of the machine, The main parts such as the grinding wheel bushing, jaws and work surface are made of corrosion-resistant materials, which is the best equipment for cutting samples. It is especially suitable for the metallographic laboratory of factories, universities and research institutes. It is an excellent equipment for cutting metallographic samples.
In order to ensure that the best samples can be cut in a safe state, the machine adopts a fully enclosed double casing structure. In addition, an independent door safety switch is also provided for the safety period. The large-volume cutting is completed, which is more convenient for the cutter to use. It is one of the necessary sample preparation equipment for the metallographic test of universities, factories and enterprises.
The machine can set the cutting speed for cutting different samples, thereby improving the quality of the cut samples. The machine is divided into manual and automatic cutting. After large-volume cutting, it is more convenient for the cutter to use. It is one of the necessary sample preparation equipment for metallographic testing in universities, factories and enterprises.