Brinell (HB), Vickers (HV), Shore (HS) hardness values. Conforms to international standards and "Leeb hardness tester specifications ZBN71010-1990" promulgated by the Ministry of Machinery Industry, "Metallic hardness test method GB/T 17394-1998" promulgated by the State Bureau of Quality and Technical Supervision, and Leeb hardness tester standard JB/ T9378-2001 and other standards.
The SHL-150 can be equipped with 7 different impact devices to automatically identify the type of impact device without recalibration. Ultra-low power design, using high-performance lithium battery to achieve long work and standby time, more compact and flexible design increases the flexibility of use.
According to the principle of measuring the hardness of the Leeb, high-precision detection of various metal materials is possible. Support "Steel" material, when testing the "forged steel" sample with D/DC type impact device, it can directly read the HB value without manual check. It is convenient to switch to all hardness systems (HL, HB, HRB, HRC, HRA, HV, HS) and convert the hardness measurement values in parallel.
SHL-150 Portable Leeb Hardness Tester
| Main functions and features: |
|
Display |
Full English display, menu type operation, simple and convenient operation. The white backlight shows that it is convenient for use in dark environment. |
|
Data communication |
With USB interface, a variety of communication methods meet the needs of different users. |
|
Measurement function |
A main engine can be equipped with 7 different impact devices. It does not need to recalibrate when replacing, and automatically identify the type of impact device. |
|
Data storage |
It can store 48~350 groups (impact times 32~1) single measurement value, average value, date of measurement, direction of impact, frequency, material, hardness system and so on. |
|
Alarm output |
The upper and lower limits of hardness values can be set in advance, automatic alarm is out of range, and it is convenient for users to batch test. |
|
Calibration |
It has the function of calibrating the value software. |
|
Battery |
Built in high-performance lithium battery and charging control circuit, with ultra long working and standby time. Liquid crystal display battery logo, real-time display of the remaining electricity. |
|
Software |
According to the requirements of users, it can be equipped with microcomputer software, which is more powerful and can meet the higher requirements of quality assurance activities and management. |
| Technical parameter： |
Indication error and repeatability
|
Item |
Impact device type |
Hardness value of standard Leeb hardness block |
Indication error |
Indicator repeatability |
|
1 |
D |
760±30HLD 530±40HLD |
±5 HLD ±8 HLD |
5 HLD 8 HLD |
|
2 |
DC |
760±30HLDC 530±40HLDC |
±5 HLDC ±8 HLDC |
5 HLD 8 HLD |
|
3 |
DL |
878±30HLDL 736±40HLDL |
±10 HLDL |
10 HLDL |
|
4 |
D+15 |
766±30HLD+15 544±40HLD+15 |
±10 HLD+12 |
10 HLD+12 |
|
5 |
G |
590±40HLG 500±40HLG |
±10 HLG |
10 HLG |
|
6 |
E |
725±30HLE 508±40HLE |
±10 HLE |
10 HLE |
|
7 |
C |
822±30HLC 590±40HLC |
±10 HLC |
10 HLC |
General parameters
|
Measuring range |
HLD (170-960)HLD |
|
Measurement direction |
360° |
|
Hardness system |
Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore |
|
Display |
LCD, 128×64 graphics dot matrix LCD |
|
Data storage |
Thermal print head, quiet, ready to print measurement results |
|
Limit setting range |
Same as measurement range |
|
Charger |
5VDC, 220VAC |
|
Charging time |
2 to 3.5 hours |
|
Battery |
3.7V, (1400mAh) Lithium Battery |
|
Ambient temperature |
0～40°C |
|
Storage temperature |
-25 to 70°C |
|
Working hours |
About 100 hours (without backlight) |
|
Communication interface |
USB |
|
Dimensions |
179×77×35mm (main part) |
|
Weight |
About 175g (main part) |
Tags :
Shore hardness tester (rubber hardness tester) is widely used in hardness measurement of rubber and plastic. With the features of simple structure, convenient use, small body, light weight, and intuitive reading, it can carry hand-held measurement, or it can be set on the same type of fixed load holder for matching production.
SW-20 Aluminum Alloy Webster Hardness Tester (also known as the clamp-type hardness tester) is a lightweight, on-site instrument that can quickly test the hardness of aluminum alloys. The test is rapid, simple, and one card can be used. The hardness value can be read directly. It conforms to the China Nonferrous Metals Standard YS/T420 and American Standard ASTM B647. It is one of the two instruments recommended by the standard YS/T420.
SHL-140 portable Leeb hardness tester can directly measure Rockwell (HRC, HRB), Leeb (HL), Brinell (HB), Vickers (HV), Shore (HS) hardness values. Conforms to international standards and "Leeb hardness tester specifications ZBN71010-1990" promulgated by the Ministry of Machinery Industry, "Metallic hardness test method GB/T 17394-1998" promulgated by the State Bureau of Quality and Technical Supervision, and Leeb hardness tester standard JB/ T9378-2001 and other standards.
The SHL-140 can be equipped with D-type and DL-type impact bodies, which achieves the ultimate in portability while achieving a powerful dual-purpose function that greatly facilitates the user. Ultra-low power design, using high-performance lithium battery to achieve long work and standby time, more compact and flexible design increases the flexibility of use.
According to the principle of measuring the hardness of the Leeb, high-precision detection of various metal materials is possible. Support "Steel" material, when testing the "forged steel" sample with D/DC type impact device, it can directly read the HB value without manual check. It is convenient to switch to all hardness systems (HL, HB, HRB, HRC, HRA, HV, HS) and convert the hardness measurement values in parallel.
Brinell (HB), Vickers (HV), Shore (HS) hardness values. Conforms to international standards and "Leeb hardness tester specifications ZBN71010-1990" promulgated by the Ministry of Machinery Industry, "Metallic hardness test method GB/T 17394-1998" promulgated by the State Bureau of Quality and Technical Supervision, and Leeb hardness tester standard JB/ T9378-2001 and other standards.
The SHL-150 can be equipped with 7 different impact devices to automatically identify the type of impact device without recalibration. Ultra-low power design, using high-performance lithium battery to achieve long work and standby time, more compact and flexible design increases the flexibility of use.
According to the principle of measuring the hardness of the Leeb, high-precision detection of various metal materials is possible. Support "Steel" material, when testing the "forged steel" sample with D/DC type impact device, it can directly read the HB value without manual check. It is convenient to switch to all hardness systems (HL, HB, HRB, HRC, HRA, HV, HS) and convert the hardness measurement values in parallel.
SHL-160 portable Leeb hardness tester is a new generation flagship model developed by our company. It adopts ultra-low power design concept, high-performance rechargeable battery, intelligent charge management and USB plug-and-play communication interface, and comes with embedded thermal printer, which supports instant on-site printing, meets the diverse measurement requirements, and has ultra-high Brightness display LCD screen, better meet the complex measurement environment, is the first choice for the majority of users.
Sign Up To Our Newsletters
Tel / Whatsapp : +86-18352836802
Email : info@johoyd.com
© 2024 Johoyd Instrument Co.,LTD. All Rights Reserved.
